Zebra® AN620 RFID Antenna
Ultra-thin, integrated mounting holes, space-saving
AN620
The AN620 is a Zebra® ultra-thin, integrated mounting holes, space-saving. It is supplied by JNXRFID to the manufacturer's published specification and ships with the connector and mounting hardware listed below.
- LHCP
- 7.0 dBic
- IP54
- EU 865–868 MHz / US 902–928 MHz
Key Features
- Polarization
- LHCP (left-hand circular) — Left-hand circular polarization keeps reads steady when tag orientation varies.
- Gain
- 7.0 dBic for wide-area coverage.
- Frequency coverage
- EU 865–868 MHz and US 902–928 MHz in one antenna.
- Enclosure
- Aluminum alloy with Kydex housing rated IP54, for indoor installation.
- Mounting
- Flush mount.
- Interface
- N-type female Pigtail — side placement.
- Environment
- -20 to +55 °C operating, -30 to +65 °C storage.
Specifications
| Frequency band | EU 865–868 MHz / US 902–928 MHz |
|---|---|
| Gain | 7.0 dBic |
| Polarization | LHCP (left-hand circular) |
| Beamwidth (3 dB) | Horizontal 75°, vertical 48° |
| Front-to-back ratio | 22 dB |
| VSWR | 1.4:1 |
| Axial ratio | <2 dB |
| Maximum input power | 6 W |
| Connector | N-type female, pigtail — side |
| Mounting | Flush mount |
| Dimensions | 391 x 275 x 12 mm (15.39 x 10.82 x 0.47 in) |
| Weight | 1.0 kg (2.2 lb) |
| Housing material | Aluminum alloy with Kydex housing |
| Ingress protection | IP54 |
| Operating temperature | -20 to +55 °C |
| Storage temperature | -30 to +65 °C |
| Humidity | IEC-68-2-30 (-25 to +40 C), 24 h cycle, 90% RH |
| Vibration | IEC-68-2-6 (10–150 Hz, 0.5 g, two axes, 1 h each) |
| TAA | TAA compliant |
Manufacturer-stated figures for this model. Where the manufacturer does not publish a value it is left out rather than estimated.
Applications
- Point of sale
- Receiving-dock portals
- Under-counter / in-shelf
- In server racks
- Inside medical equipment cabinets
Typical vertical markets: Retail, Enterprise/Office, Data Center, Hospitality, Healthcare.
Which read zone is the AN620 built for?
The Zebra® AN620 is supplied by JNXRFID to the manufacturer's published specification. Manufacturer-stated figures: 7.0 dBic, EU 865–868 MHz / US 902–928 MHz, 391 x 275 x 12 mm. The answers below cover the questions integrators ask most often before specifying it.
What frequency band does the Zebra® AN620 cover?
It covers both regional UHF bands in one antenna — US 902-928 MHz and EU 865-868 MHz — so the same part number can be specified in North America and in Europe.
Do operators have to align tags with the Zebra® AN620?
No. The Zebra® AN620 is circularly polarized, so it reads tags at any orientation and operators do not have to align each label by hand.
How much space does the Zebra® AN620 need?
The antenna measures 391 x 275 x 12 mm. It weighs 1.00 kg. The housing is Aluminum alloy with Kydex housing. It is rated IP54.
What connector does the Zebra® AN620 use?
The connector is N-type female, pigtail — side.
Where is the Zebra® AN620 normally installed?
It is normally installed for Point of sale, Receiving-dock portals, Under-counter / in-shelf, In server racks, Inside medical equipment cabinets. Typical vertical markets are Retail, Enterprise/Office, Data Center, Hospitality, Healthcare.
Can the Zebra® AN620 be evaluated before a volume order?
Yes. The Zebra® AN620 is available as a single evaluation unit before volume orders, so the antenna can be tested against your own reader, tags and read zone first. Use the Request a Quote button for current lead time and evaluation terms.